Posts

square floor scrubbers

Square Floor Scrubbers Have Changed Floor Care

The world of floor care has completely changed with the evolution of the square floor scrubbers. Over the last decade, this technology has made stripping floors with harsh chemicals a almost a thing of the past. There are a few things you need to understand before you make the switch though.

How Square Floor Scrubbers Strip Floors

When a floor is stripped using a square floor scrubber, the floor finish is mechanically removed using an abrasive pad. The scrub head uses high speed orbital motion, rather than circular as with traditional machines. Because of this additional movement and a specialized floor pad, removing floor finish from a floor is fast and easy.

One thing to keep in mind is that only the surface floor finish is removed in this process. When floor finish is applied to a completely stripped floor, the first few coats of finish are absorbed into the floor. After those initial coats are down, the additional layers reside on top of the floors surface. These are what the square floor scrubber removes with the abrasive pad.

Types of Square Floor Scrubbers

There are 2 types of square floor scrubbers. Upright square scrubbers and automatic floor scrubbers with a square head.

Upright square scrubbers are similar to single disk, rotary machines. They are usually cord electric although some manufacturers have a battery version. These are typically more portable than than automatic scrubbers. They can also be used both with wet stripping as well as dry. Although, when used dry, it is a good idea to adapt the machine to connect to a vacuum system. The fine dust that comes from the floor can be difficult to control and dangerous for the operator.

The second type is an automatic scrubbers with a square scrub head. These machines have an on-board solution delivery system as well as a vacuum system. Because of this, they can remove floor finish very quickly. Another benefit is that they are battery powered. Water is continuously delivered to the scrub head with eliminates dust. The scrub head and abrasive pad produces a light slurry which is vacuumed up by the recovery system. This means that stripping the floor is as easy as operating a floor scrubber.

What Else You Need To Know

Not all floors can be stripped with a square floor scrubber. If the finish is very dirty or damaged, chemical stripping may still be required to restore the floor. That being said, the square scrubber used with a maroon prep pad, can be used to remove the majority of the finish before a chemical stripper is used. This speeds up the process greatly.

Floor Scrubber Head Types

Automatic Floor Scrubber Head Types

Over the years, the automatic floor scrubber head types have evolved. The scrub head is where the work really gets done. The most common scrubber head types are disk, cylindrical, and square oscillating. Each can be very useful when it comes to getting a floor clean, but depending on what type of floor you need to clean, selecting the right one can make the task much easier.

Disk Automatic Scrubber

Disk Floor Scrubber HeadThe disk scrub head is the most common type. This traditional style consists of either a single or double rotating disk that uses a floor pad or brush to agitate the dirt on the floor. Because of the wide variety of pads and brushes available, disk floor scrubbers can be used for general cleaning, deep scrubbing and even stripping floors. Floor pads can be easily replaced and are relatively inexpensive.

Brushes are also an option and have many different uses. A brush is a good option when cleaning uneven surfaces such as ceramic tile or concrete. The bristles can get down into the dynamic surface better than a flat pad. Brushes do tend to be more pricey up front, but last a lot longer than pads.

Cylindrical Automatic Scrubbers

Cylindrical Floor Scrubber HeadA cylindrical floor scrubber head is another option on for your automatic scrubber. These usually have a cylindrical brush that sits horizontally under the machine. Because the brush rotates down toward the floor rather than across the surface, as with the disk, these make a good option for uneven surfaces. Many of these have 2 brushes that counter rotate so that they can get into grout lines from multiple directions. Because the brushes are usually very durable, they tend to last.

Multiple brush types make it possible for cylindrical floor scrubbers to clean many types of rough surface floors. Stiff brushes are a good option for rough concrete and grouted floors. Softer brushes work well to clean rubber floors, textured tile and even synthetic rubber athletic floors.

Square Oscillating Scrubbers

Square Floor Scrubber HeadThese fairly new type of square scrubbers are making a big impact on the floor care industry. When used with a special stripping pad, square scrubber heads are able to strip floor finish from a floor with out using a chemical floor stripper.

They also work great for cleaning vinyl tile floors regularly. The standard types of floor pads, such as red, white, blue and black are available in the square format. Because these scrubber heads oscillate very quickly, they apply more agitation to the floor and thus more cleaning power. There are square pad-like brushes available that can make cleaning grouted tile and other dynamic surfaces possible.

Like any tool, choosing the right floor scrubber head depends on the job that needs to be done. Evaluating the types of floors to be cleaned will help with making the best decision for your facility.